Pentax OPTIO WS80 Operating Manual page 35

iiiiiiiiiii !i!i!:!51;_ii_i!J_
iiiiiiiiiii _i;;_i:ii
iiiiiiiiiii iii_iii_!i
iiiiiiiiiii iii_iiiiiiiiiiiii_i
i
_em0 • The number of recorded pixels for images captured in III (Green)
%J mode is fixed at _.
• The number of recorded pixels for images captured in I_ (Half-length
Portrait) or I_q (Frame Composite) is fixed at 3_1.
• The number of recorded pixels for images captured in _ (Digital
Wide) or ((&)) (Digital SR) mode is fixed at [5_. (The number of
recorded pixels will be L3_ if you exit the _ mode without taking the
second picture.)
• If you change the [Recorded Pixels] setting frequently, you can save
time by assigning it to the Green button (p.124).
You can adjust the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
Press the MENU button in a mode.
The [1_1 Rec. Mode] menu appears.
,2 Use the four-way controller (• •) to select [EV
Compensation].
Use the four-way controller ( • _ )
to select the EV value. I Evco_ponsati_,_-*_.0 _ NI
Movie
To brighten select a positive (+) value To ' Ill
' " I D-Range Setting III
darken, select a negative (-) value. Iht
....
i
Shoot _1
Bhnk Detection
You can choose the EV setting in the range i ........ ' _
III
• Diui ......... _ u
of -2.0 EV to +2.0 EV in 1/3 EV steps. _Exit
Press the MENU button.
The camera returns to capture status.
......... • When the histogram is displayed in still picture capture mode/playback
_e_o mode, you can check the exposure (p.30).
• The EV compensation function cannot be used in II (Green) or t
(Auto Picture) mode•
• If you change the [EV Compensation] setting frequently, you can save
time by assigning it to the Green button (p.124).