Pentax OPTIO WS80 Operating Manual page 17

5
8
Press the zoom button towards the right (0_).
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller ( < I_ ) Press to choose a different frame.
Zoom button towards the Press to return to the 9-frame display of the
left (_'_) frame selection screen, and then perform Step 4
to choose a different frame.
Press the OK button.
The framed image appears on the display.
When the camera recognizes a person's
face, the Face Recognition function is
activated and the face recognition frame
appears (p.76).
8
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
Press the shutter release button fully.
The picture is taken.
' The number of recorded pixels is fixed at [_ (2048xi536).
, At shipment, the camera includes 3 default frames and 87 optional
frames built.in. (The CD,RQM Supplied with the camera contains a
total of 90 frames, including the default frames.)
Optional Frames
The optional frames are stored in the built-in memory in the Optio WS80. These
optional frames are deleted if the files on the built-in memory are deleted with a
computer or the built-in memory is formatted. To reload the optional frames into
the built-in memory, copy the files from the CD-ROM (S-SW87) supplied with
the camera (p.173).
Adding a Frame to a captured image ,_p.171