Pentax OPTIO WS80 Operating Manual page 41

#
#
#
Use the four-way controller (• T)
to change the sensitivity.
[(
Pixet Track SR []
Recorded Pixels
White Balance 154 II
F.... =ngArea i!o9 H
AE M_ _ IZU? II
_Cancel _OK
Press the OK button.
The setting is saved.
Press the MENU button.
The camera returns to capture status.
• When the sensitivity is set to 3200 or 6400. the number of recorded
pixels is fixed at _ (2592x1944).
• When set to m (Green), ,I_ (Movie) or ;_ (Underwater Movie) mode.
only Auto (sensitivity 64 - 800) is available.
• When set to ((&)) (Digital SR) mode, only Auto (sensitivity 64- 6400)is
available.
• When set to _ (Fireworks) mode. the sensitivity is fixed at its
minimum setting
• If you change the [Sensitivity] setting frequently, you can save time by
assigning it to the Green button (p.124).
Saving the Sensitivity setting ,_p. 133 ]
This specifies whether Blink Detection function works when you use the
Face Recognition function. The default setting is _ (On).
1 Press the MENU button in a mode.
The [1_ Rec. Mode] menu appears.
2 Use the four-way controller (• T) to select [Blink
Detection].