Pentax OPTIO WS80 Operating Manual page 43

#
Press the MENU button.
The camera returns to capture status.
One of the following icons appears on the display.
(_U_,Te_ When [Pixel Track SR] is set to _z
When the shutter release button is pressed halfway with [Pixel Track
_,_ SR] set to D, and the shutter speed is slow or the flash mode is set to
_9 (Flash Off) (Camera shake warning).
When [Pixel Track SR] is set to &z. camera shake is corrected after
shooting, and then the corrected image is saved.
The Pixel Track SR function does not work in the following situations:
- When ,1_ (Movie), ;_ (Underwater Movie), D]_ (Digital Wide).
I_ (Half-length Portrait), _ (Fireworks), Ilmll (Digital Panorama) or
I_- (Frame Composite) mode is selected as the shooting mode
- When ® (Self-timer), _ (Continuous Shooting) or _,_ (Burst
Shooting) is selected as the drive mode
- When the flash discharges
- When the sensitivity is set to 1600 or higher
During Voice Recording
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is _ (On).
1
2
3
Press the MENU button in a mode.
The [1_1 Rec. Mode] menu appears.
Use the four-way controller (• • ) to select [Instant Review].
Use the four-way controller ( • _ )
to select _ or D.
Instant Review is displayed.
[] Instant Review is not displayed.
Green Button 0 _1
Sharpness _ Ill
I Saturation _ _1
I C_traet _ U I
! LME"UjExit I