Pentax OPTIO WS80 Operating Manual page 38

4
Use the four-way controller (• v)
to change the setting.
You can check the results of selected white
balance settings on the preview image each
time you press the four-way controller
(-v).
5 Press the OK button.
The setting is saved.
8 Press the MENU button.
The camera returns to capture status.
If you change the[White Balance]setting frequent!yl you can save time
by assigning it to the Green button (p.124).
Saving the White Balance setting ,_p.133 ]
Have a blank sheet of white paper or similar material ready.
I
2
In the [White Balance] screen, use the four-way
controller (• v) to select _ (Manual).
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3 Press the shutter release button fully.
The white balance is automatically adjusted.