Pentax K-5 Operating Manual page 156

3
4
Enter the text.
Up to 18 single-byte
alphanumeric
characters and
symbols can be
entered.
Text selection
cursor
Text input cursor
SER1Renam_USERMode @A/_
BCDEFGHt JKLMNOPQR
STUVWXYZ0123456789
.,()[]<>@-_/:;!?+#
_+:S%'"{} ,+_
Available operations
Four-way controller Moves the text selection cursor.
(Av,1_)
Rear e-dial (',,,'_,,,') Moves the text input cursor.
(_ button Switches between upper and lower case letters.
OK button Enters a character selected with the text selection
cursor at the position of the text input cursor.
"_ button Deletes a character at the position of the text
input cursor.
After entering the text, move the text selection cursor to
[Finish] and press the OK button.
The name is changed.
Repeat Steps 2 to 4 to change the names of other USERmodes.
Press the
MENU
button.
!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!
!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!
!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!
!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!
!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!
!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!
I
2
Select [Check Saved Settings] in Step 3 of "Saving the
Settings" (p.227) and press the four-way controller ( • ).
The [Check Saved Settings] screen appears.
Use the four-way controller (A v) to select [USER1] to
[USER5] and press the four-way controller ( • ).
The current settings saved in the selected USER mode are displayed.