Pentax K-5 Operating Manual page 150

I
2
3
!mage finishing tone is fixed to [Bright] and the paramete[s cannot be changed
in the following conditions.
whenCross Processing is set
Press the four-way controller ( • ) in Capture mode.
The screen to select a custom image appears.
After the power is turned on, the last image taken is displayed in the
background.
Use the four-way controller ( • • )
to select an image finishing tone.
Use the four-way controller (• •)
to choose a parameter you want
to change.
4
Use the four-way controller ( • • ) to change the setting.
The background image changes according to the settings.
You can visually check the saturation and hue with the radar chart.