Pentax K-5 Operating Manual page 129

Setting a File Format
You can set the format of image files.
JPEG
RAW
RAW+
Captures images in JPEG format. (default setting)
You can change the number of recorded pixels in [JPEG Recorded
Pixels] and the image quality level in [JPEG Quality].
RAW format is a CMOS sensor output format saved without
processing.
Effects of White Balance, Custom Image and Color Space are not
applied to the captured images, but they are saved as actual original
information. When you perform the development process by using
RAW Development function (p.271), or using the provided software
(PENTAX Digital Camera Utility 4) after transferring RAW data to a
computer, you can create JPEG images with these effects.
Images are saved in both RAW and JPEG formats.
When [One Push File Format] is assigned to the RAW/Fx button, you
can press the RAW/Fx button to temporarily change the file format and
save an image in both file formats. (p.203)
I
2
when Extended Bracketingl Digital Filter, HDR Capture or Cross Processing is
set, the fi!e foimat is set to [JPEG] and cannot be changed. To change the file
format, turn these functions off.
Select [File Format] in the [1_ Rec. Mode 1] menu and
press the four-way controller ( • ).
Use the four-way controller (• •)
to select a file format.
When the file format is changed, the
number of recordable images appears at
the top right of the screen.
Press the
OK
button.
Press the
MENU
button.
The camera is ready to take a picture.