Pentax K-5 Operating Manual page 146

I
2
3
• Corrections can only be made when using DA. DA L. D FA or some FA lenses
(p.337). [Lens Correction] cannot be selected when an incompatible lens is
attached.
• [Distortion Correction] is disabled when using a DA FISH-EYE 10-17mm.
• The Lens Correction function is disabled when using an accessory such as a
close-up ring or rear converter that is attached betweer the camera and the
lens.
• When the Lens Correction function is activated, it may take longer to display
Instant Review and the shooting speed for continuous shooting may be
slower.
• The effect of the Lens Correction function may be barely noticeable in some
cases due to the shooting conditions or other factors.
Select [Lens Correction] in the [1_1 Rec. Mode 1] menu and
press the four-way controller ( • ).
The [Lens Correction] screen appears.
Use the four-way controller (• •) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj].
Press the four-way controller (•)
and use the four-way controller
(• •) to select [OFF] or [ON].
Lat-Chromatic-Ab Adj
i_!i_!ili_iii!iS
;_!_ili!!i!i_!ilili
_iiiii!,ii_!ii_!i!i!i!i
Press the
OK
button.
Press the MENU button twice.
The camera is ready to take a picture.
when a compatibl e lens is attached and the file format is set to [RAW] Or
[RAW+], the correction information is saved as a RAW file parameter and you
can select [On] or [Off] when developing the RAW images. (p.274)