Table of Contents
Advertisement
Available languages
Available languages
F
F
RESH
Door Storage
Beverage Chiller
(select models)
The Beverage Chiller keeps beverages
and other items colder than the rest
of the fresh food compartment. An air
inlet directs air from the freezer into
the chiller.
Controls
The Beverage Chiller control is located
on the left side wall of the fresh
food compartment. Turn the control
clockwise for colder temperature.
To Remove Beverage Chiller:
• Unload the Beverage Chiller.
• Slide the assembly up and pull straight out.
Note:
If the Beverage Chiller is installed directly
under the dairy center or a door bucket, the bucket
or dairy center will need to be removed before
removing the chiller.
To Install Beverage Chiller:
• Align one of the air inlet holes with the hole
cut-out on the door.
• Slide the assembly in and down so that the hooks
are firmly seated on the door liner.
Note:
The Beverage Chiller will not operate
properly if the air intake hole is not aligned with
the control location.
11
F
OOD
EATURES
Dairy Center
The Dairy Center provides con venient
door storage for spreadable items
such as butter and margarine. On
select models, this compartment
can be moved to several different
locations to accommodate storage
needs.
To Remove:
• Slide dairy center up and pull out.
To Install:
• Slide assembly in and down so that the hooks are
firmly seated on the door liner.
To Remove Dairy Door:
• Press in sides of dairy door and pull out.
To Install Dairy Door:
• Slide sides of dairy door inside dairy center until
hinge points snap into place.
Door Buckets
Door Buckets can be moved to meet individual
storage needs.
To Remove:
• Lift bucket up and pull straight out.
To Install:
• Place bucket in desired door
liner retainer, push down until
bucket stops.
Hide quick links:
Advertisement
Chapters
Table of Contents
