NewAir AC-10000E Owner's Manual page 12

For Continuous Drainage
• Remove the water plug from the
drainage p0rt and-retain It for future
use,
FIG.18
Connect the included drainage hose
to the drainage port as shown.
Connect the other end of the hose
into a drain,
Water plug
j-
J Cap for the
----_ =f
_._ water plug
The drainage hose may be extended
by adding an extension hose with a
suitable connector,
FIG.19
PLEASE NOTE:
1. The drain must be at or below the ]ewl
of the drainage port.
2.
The full water tank indicator light will not
work when the unit is being
continuously drained,
,
To extend the drainage hose, you can
connect it with another hose with an
overall diameter of approximately 0.7"
(18 ram),
,
If the room humidity level is over 85%° it
will be necessary to continuously drain
the unit using the drainage hose.
Drainage hose
___ included with the unit
FIG,20
Drainage hose
included with the unit
Extension hose (OD: 0.7" )
12