Replacing The Oven Light; Removing The Oven Door - Fisher & Paykel OR48DDPWGX User Manual

6
B
A
A
34

REPLACING THE OVEN LIGHT

Before any maintenance is started involving electrical parts of the appliance, it must be
disconnected from the power supply.
– Let the oven cavity and the heating elements cool down;
– Switch off the electrical supply;
– Remove the protective cover (fig. 6.15);
– Unscrew and replace the bulb with a new one suitable for high temperatures (300°C)
having the following specifications: 120V, 60 Hz, 25W, E14
Fig. 6.15
– Refit the protective cover
NOTE: Oven bulb replacement is not covered by your guarantee

REMOVING THE OVEN DOOR

The oven door can easily be removed as follows:
– Open the door to the full extent (fig. 6.16a).
– Open the lever "A" completely on the left and right hinges (fig. 6.16b).
– Hold the door as shown in fig. 6.16.
– Gently close the door (fig. 6.16) until left and right hinge levers "A" are hooked to part
"B" of the door (fig. 6.16b)
– Withdraw the hinge hooks from their location following arrow "C" (fig. 6.16d).
– Rest the door on a soft surface.
– To replace the door, repeat the above steps in reverse order.
Fig. 6.16
Fig. 6.16a
B
Fig. 6.16b
(fig. 6.15)
Fig. 6.16c
C
Fig. 6.16d