Fisher & Paykel OB60S9DE Series Installation Instructions And User Manual page 29

Care and cleaning
27
Removing and refitting the
side racks and catalytic panels
Use a flat-head screwdriver or a small
coin to loosen the fixing screws.
When refitting the side racks, make
sure that they are the right way up,
as in the illustrations, and that you
tighten the fixing screws.
When refitting the side catalytic
panels, make sure that:
- the arrows are pointing upwards
- the panel with the hole is on the
left oven wall.
Note: the back of the oven is also a
catalytic panel, but this is not
reversible and should not be removed.
Fig. 6 Removing the side racks
Drop-down grill element
To lower the grill element: use a flat-head screwdriver or a small coin to loosen the element
fixing screw.
When you have finished cleaning the oven ceiling, raise the grill element and screw the element
fixing screw back onto the stud. Make sure that the fixing screw is tightened and the element is
held securely in place.
The grill element itself is self-cleaning.
Fixing screw Stud
Fig. 7 Lowering the grill element