Fisher & Paykel 7 Series Installation Manual
Hide thumbs
Also See for 7 Series:
- User manual (42 pages) ,
- Installation manual/user manual (28 pages) ,
- Installation manual (24 pages)
Subscribe to Our Youtube Channel
Related Manuals for Fisher & Paykel 7 Series
Summary of Contents for Fisher & Paykel 7 Series
- Page 1 BUILT-IN OVEN MINIMAL OB60SMPTDG1, OB60SMPTNG1, OB60SMPTDB1, OB60SMPTNB1, OB60SM16PLG1 & OB60SM16PLB1 CONTEMPORARY OB60SDPTDX2, OB60SD16PLX1, OB60SD13PLX1, OB60SD11PLX1 & OB60SD9PLX1 INSTALLATION GUIDE NZ AU UK IE...
-
Page 2: Safety And Warnings
SAFETY AND WARNINGS WARNING! WARNING! To avoid hazard, follow these instructions carefully before installing or using this appliance. Electric Shock Hazard • Please make this information available to the person installing the appliance—doing so could Failure to follow this advice may result in reduce your installation costs. -
Page 3: Prior To Installation
PRIOR TO INSTALLATION INSTALLATION MILESTONES Ensure that: Milestone indicator • The countertop and oven cavity are square and level, and are the required dimensions. These milestones represent areas throughout • The installation will comply with all clearance requirements and applicable standards and that are pivotal to an optimal installation regulations. - Page 4 COMPONENTS PARTS TOOLS Supplied Not supplied Screws (2) Metal side shelves Powered driver Cross-head fixing nut (2) screwdriver...
-
Page 5: Product Dimensions
PRODUCT DIMENSIONS POWER OUTLET LOCATION Product Dimensions a Overall height of oven B Overall width of oven c Depth of front frame (excludes dial, handle and front stainless trim) DATUM : FRONT OF CHASSIS d Depth of oven chassis and front frame (excludes dial, handle and front stainless trim) E Depth of chassis F Height of chassis... -
Page 6: Cabinetry Dimensions
CABINETRY DIMENSIONS PROUD INSTALL 16-20mm PROFILE PLAN FLUSH INSTALL 16-20mm CABINETRY DIMENSIONS A Minimum inside width of cavity B Overall width of cabinetry C Overall height of cabinetry D Minimum inside height of cavity E Minimum inside depth of cavity If installing a cooktop above the oven, ensure adequate clearance is provided as per the cooktop manufacturer’s instructions. - Page 7 CHECK CAVITY UNPACK PRODUCT Do not lift or move the product using the handle. Keep all packing materials until the unit has been inspected. Inspect the product to ensure there is no shipping damage. If any damage is detected contact the dealer or retailer you brought the product from to report the Measure cavity dimensions.
-
Page 8: Connect Power
REMOVE DOOR CONNECT POWER This oven must be connected to the mains power supply only by a suitably qualified person. This oven must be earthed. Open the door and remove all cable ties and packaging holding the oven shelves in place. Before connecting the oven to the mains power supply, check that: the domestic wiring system is suitable for the power drawn by the oven (as specified on the rating plate) - Page 9 POSITION OVEN INTO CAVITY REFIT DOOR Some models only*: For dark cabinetry, the supplied trim can Holding the door on both sides, carefully be used to enhance clashing finish. lift door back onto the hinges. To install, remove the trim adhesive and press to secure to cavity.
- Page 10 ALIGN AND SECURE REFIT SHELVES Sliding shelves Place shelves back into the oven at the desired Align oven with surrounding cabinetry level. and appliances. Ensure shelves are level and correctly positioned with the guard rail at the back. Using the product as a guide, pre-drill 2 Wire shelves x 3mm pilot holes.
-
Page 11: Installer Checklist
INSTALLER CHECKLIST TEST OVEN TO BE COMPLETED BY THE INSTALLER Follow the guidance on screen to ensure Ensure the oven is level and securely fitted to the cabinetry. oven turns on and heats correctly. Refer to your User Guide for more Check the lower trim is undamaged. - Page 13 FISHERPAYKEL.COM © Fisher & Paykel Appliances 2023. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue.
Need help?
Do you have a question about the 7 Series and is the answer not in the manual?
Questions and answers