Download Print this page

Advertisement

Quick Links

Care and cleaning
Always turn off the oven at the wall first. Ensure the oven has cooled down completely before starting.
Manual cleaning
• Before any manual cleaning or maintenance, first wait
for the oven to cool down to a safe temperature to
touch, then turn its power supply off at the wall.
• Read these cleaning instructions and the 'Safety and
warnings' section before you start cleaning your oven.
• To prevent soiling from becoming 'baked on' and
stubborn, we recommend removing any easy-to- reach
spills, food or grease stains from the oven cavity enamel
after each use.
What?
Glass
surfaces
(oven door
panes,
control
panel)
https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a...
Always
How?
Door comprises a total of 3 glass panes
Never
• Never use a steam cleaner.
• Never store flammable substances in the
oven.
• Never use abrasive or harsh cleaners,
cloths, scouring pads or steel wool.
Some nylon scourers may also scratch.
Check the label first.
• Never use oven cleaner on catalytic
panels or in a pyrolytic oven.
• Never leave alkaline (salty spills) or
acidic substances (such as lemon juice
or vinegar) on the oven surfaces.
• Never use cleaning products with a
chlorine or acidic base.
Important!
• Don't use oven cleaners or any
other harsh/abrasive cleaners,
cloths, scouring pads, steel
wool or sharp metal scrapers to
clean the glass surfaces. These
scratch the glass and may
damage its special coating,
which in turn could result in the
glass cracking or shattering.
• Even if you only clean the inner
Updated: Mon, 03 Aug 2020 05:53:04 GMT
Powered by
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the OB60SL7DEX1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fisher & Paykel OB60SL7DEX1

  • Page 1 Door comprises a total of 3 glass panes panes, damage its special coating, which in turn could result in the control glass cracking or shattering. panel) • Even if you only clean the inner https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 2 • Always rub the stainless steel in the direction of the grain. door Aluminium • Clean with a solution of mild detergent and hot water, then wipe dry. framing of https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 3 3. Wipe clean with a damp cloth and allow to dry completely. • To make cleaning the oven ceiling easier, the grill element can be lowered. See following pages for instructions. https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 4 2. To remove a telescopic sliding shelf*, grip it at the front (making sure you are gripping the wire shelf and the sliding frame together), lift upwards and pull it out of the oven. For your safety, the wire shelf and telescopic https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT...
  • Page 5 Remove both side racks by: 1) pushing down on the retaining wire until it clears the lower lock stud and swing out wards to 2) clear the upper lock studs, then 3) lift out. https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 6 To replace a wire shelf, check the guard rail (as shown) to make sure the shelf is the right way up. Slide it horizontally back along the side racks ensuring it is level and the stop notch is facing down. https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT...
  • Page 7 • When you have finished cleaning the oven ceiling, raise the element and screw the element fixing screw back onto the stud. Make sure that the fixing screw is tightened and the element is held securely in place. • The element itself is self-cleaning. https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 8: Replacing The Oven Light Bulb

    (300°C) and with the specifications: 230-240V, 50Hz and 25W. The light is located in the ceiling of the oven, center front. Changing the bulb 1. Let the oven cavity and grill element cool down before changing the bulb. https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 9: Removing And Refitting The Oven Door

    6. Turn the oven back on and set the clock (see ‘First use’ for instructions). Removing and refitting the oven door Take care, the oven door is heavy! To remove the door 1. Open the door fully 2. Open the levers. https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 10 5. Disengage the hinges and remove the door. door slightly to engage the hinge. 2. Open the door fully. 3. Close the levers fully. If the levers do not lie flat, https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 11 • If the glass panes feel difficult to remove or replace, do not force them. Call your Authorised Repairer or Customer Care for help. Service visits providing assistance with using or maintaining the oven are not covered by your warranty. https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 12 1. Press in on both tabs to release the Glass retainers. 2. Slide both Glass retainers away from the pane 4. Slide the pane toward the top of the door and lift out https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 13 • you do not force any of the panes into place. If you are experiencing difficulties replacing the panes, remove them and start the process again from the beginning. If this still does not help, call Customer Care. https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT...
  • Page 14 4. Ensure the pane is the right way up 1 (ie the logo should be readable at the bottom of the 6. Slide the glass retainers back into position and door) https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...
  • Page 15 Make sure the glass retainers are correctly and firmly in place and that the glass panes are secure. https://producthelp.fisherpaykel.com/au/Cook/Built-In_Ovens/Single/OB60SL7DEX1/User_Guide_OB60SL7DEX1/10_Care_a… Updated: Mon, 03 Aug 2020 05:53:04 GMT Powered by...