Fisher & Paykel DishDrawer DD605 User Manual page 32

Fault codes
30
Fault Codes
F1
F2
F3
F4
F5
F6
F7
F8
F9
Possible Causes
Flood switch has been
activated.
Motor problem.
Temperature sensor
failed.
Faulty temperature
sensor or element
Lid fault
Lid fault
Lid fault
Electrical problem
Electronics
malfunction.
What to Do
Turn the water and power supply to the
DishDrawer® off and call your Authorised
Service Centre.
Call your Authorised Service Centre.
Ensure water coming in through the inlet
o
hose is less than 65 C. You may need to
install a tempering valve on your water
supply.
Call your Authorised Service Centre.
Turn power supply to DishDrawer off,
1
then turn on power supply. Fault may
reset.
Call your Authorised Service Centre.
2
Turn power supply to DishDrawer off,
1
then turn on power supply. Fault may
reset.
Call your Authorised Service Centre.
2
Call your Authorised Service Centre.
Turn power supply to DishDrawer off.
1
Call your Authorised Service Centre.
2
Call your Authorised Service Centre.