Installation - Fisher & Paykel DISHDRAWER DD24 User Manual

Safety and warnings
Important sa@ty instructions
installation
This DishDraweP _must be instMted and located in accordance with the InstMtation instructions
before it L5used. If you did not receive InstaNation instruction sheets with your DishDrawer_ you
can order them by caning },our Authorised Repairer or dowMoad them from our IocM Fisher &
Paykel website, Hsted on the back cover°
lnstafiation and service must be performed by a quMified technician,
If the power supply cord L_damaged, it must be replaced by a deMer or Authorised Repairer or a
similar quafified trades person in order to avoid a hazard,
Ensure the DishDrawer ®is secured to adjacent cabinetry using the brackets provided, Faiture to
do so may result in an unstable product, which may cause damage or #_jury,
Do not operate this appliance ff it is damaged, maffuncdoning, partiaNy disassem bled or has
missing or broken part.£ including a damaged power soply cord or plug,
, Do not store or use petrol, or other flammable vapours and fiquids in the v£inity of the
DishDrawer ®.
Connect to a properly rated, protected and sized power supply circuit to avoid electr£M overload.
Make sure that the power supply cord L_located so that it will not be stepped on, tr@ped over or
otherwise subject to damage or stress.
Do not instalt or store the DishDrawer ®where it win be exposed to temperatures below freezing
or exposed to weather°
Do not use an extension cord or a portable electficM outlet device (e,g, multi-socket outlet box)
to connect the DishDrawer ®to the power supp/yo
This @pliance must be grounded, ln the event of a maffuncdon or breakdown, grounding w#l
reduce the risk of electr£ shock by providing a path of least resistance for electric current. This
appliance L_equipped with a cord having an equoment_grounding conductor and a grounding
plug, The plug must be plugged into an appropriate oudet that is installed and grounded
in accordance with aft IocM codes and ordinances, WARNING - improper connection of the
equipment-grounding conductor can resu# in a risk of electr£ shock. @eck with a qua#fled
e_ectr£ian or service representative if you are in doubt as to whether the apph:ance L_properly
grounded, Do not modit}_ the plug provided with the appfiance; ff it will not fit the oufle5 have a
proper outtet instMted by a quahYied technician,
lf the DishDrawer® is instalted as a permanently connected appliance:
GROUNDING iNSTRUCTiONS - This apph:ance must be connected to a grounded metat, permanent
wiling system, or an equipment-grounding conductor must be run with the circuit conductors
and connected to the equipment-grounding termina_ or lead on the appliance,