User maintenance
'I
2
4
5
Cleaning
the spray arm and filter
plate
To remove end clean the spray arm end filter ptate
Unplug the DishDrawer
or turn it off at the power
supply.
Unc[ip the glass supports from the rack wires and
fold a[[ the adjustable
racks away, so that they
are upright
and dose to the top.
Remove the base rack carefully. Lift from the back
end first to prevent
knocking
the detergent
and
rinse aid dispenser.
Lift the spray arm and shake any foreign
material out.
Rinse it dean
under running
water and wipe with a damp cloth.
Lift and remove the drain filter.
"',, t
_,__,
_*h
il
_,'i_,",_,,'_',,
',',: N
I /
_1_/',, _
,,
,,'_ _,,;
6
In the centre of the filter plate there are two rings. Turn the outer ring antidockwise,
about a 1/8
turn. This will release the filter plate.
7
Lift the filter plate out. Remove any foreign
material, wash in hot soapy water and rinse
thoroughly
in clean water, then wipe with a damp cloth. Take care handling
the sharp outer edge
of the filter plate.
Tum outer
ring 1/8 turn