Fault Codes; How To Recognise A Fault Code; How To Attend To A Fault Code - Fisher & Paykel DISHDRAWER DD24 User Manual

Fau t codes
How to recognise a fault code
When a fault has occurred, the DishDraweg will continuously beep every second.
The fault code will be displayed on the wash programme selector.
Each fault code is shown in the following chart.
How to attend to a fault code
i Press the _/_ button briefly to stop the beeping.
2 Press the 0 / 0 button to turn the DishDrawe¢ '_off. Wait a few seconds.
3 Press the 0 / 0 button to turn the DishDraweg back on.
Hos the fault code disoppeored? >YES > You can continue to use your DishDrawegE
NO
a Note down the fault code.
5 Unpk_g the DishDraweg' or turn it off at the power supply.
6 Check the chart overleaf and try correcting the fault where possible, following the instructions in
the 'What to do' column.
Has the fault code disappeared? >¥E$ > You can continue to use your DishDrawegE
NO
7 Unplug the DishDrawe¢ '_or turn it off at the power supply.
s Call your Authodsed Service Centre or Customer Care and advise them of the fault code.
This information will help them respond to your request.