Fisher & Paykel DISHDRAWER DD24 User Manual page 37

Fau t codes
U1 ®
L J
HEA_fY hJORMA& _;4ST DELf_AT_ R_hdSE
Fill fault due to...
Check if there is water in the
DishDrawer and follow the relevant
steps below.
, /
/
._water supply not
being turned on.
OR
._spray arm not being
fitted correctly.
If there is no w,ater in the DishDmwer:
'I Turn on the water supply to the
DishDrawer,
2 Hug the DishDrawer back in or turn
it on at the power supply_
If there is woter in the DishDmwer:
1 Plug the DishDrawer back in or turn
it on at the power supply.
2 Press the _IB button and wait for 30
seconds,
s Press the @/@ button, The
DishDrawer will automatically drain
(approx. 2 minutes), You may need to
repeat steps 2 and 3 again.
4 When the DishDrawer is empty,
check that the spray arm is correctly
fitted and can rotate freely, See 'User
maintenance instructions',
U4
L J
Fault in the other
drawer preventing the
use of this drawer.
Check other drawer, attend to fault code
on that drawer.