User Maintenance Instructions; Cleaning The Surfaces; Cleaning The Drain Filter - Fisher & Paykel DISHDRAWER DD24 User Manual

User maintenance instructions
DBconnect the DishDrawer ®from the power supply and allow aH its parts to cool betbre any cleaning or
mdntenance°
Cleaning the surfaces
We do not recommend the use of the following cleaning aids on your D_shDrawer ®as they may damage
the surfaces:
Plastic or staiMess steel scouring pads _ Abrasive, solven6 househoM cleaners
Acid or atkaline cteaners _ Hand washing tiquids or soap
Stainless steal cleaners or polishes _ Laundry detergents or dLdnfectants
1 Wipe with a dean damp cloth, Take care not to wet the control panel.
2 Dry with a clean lint-free cloth,
Cleaning
the drain
filter,
spray arm and filter
plate
We recommend that the drain filter is cleaned
whenever there is evidence of food particles,
The spray arm may need cleaning about once a month
in normal use or more often should the need arise.
ff a dL_hwasher deane#descMer is used, you must run a wash
programme with detergent immediatdy afterward to prevent
any damage to your DL_hDrawer®°
I H_ HHH _ d H
I HH_ _ E_HH_ H
EiiiiiiiiL
m mu
X_! I L _ ...... _ !l[_ll ,
Filter plate Drain filter
The DishDraweP _must be used with the filter #at6 dra#_ fi#er and spray arm correctly in piece.
Cleaning the drain filter
1 Unplug the DishDraweg or turn it off at the power supply,
2 Lift up the drain filter access panel on the base rack {if fitted).
s Lift and remove the drain filter. It is normal to find some water under it,
4 Empty, rinse dean under running water and replace back into the allocated space.
5 Ensure the drain filter is flush with the filter plate,
6 Plug the DishDraweg _ back in or turn it on at the power supply.