Vcr Plus+®Timer Recording - Philips DVDR985 Owner's Manual

42 VCR Plus+®Timer Recording
A PlusCode_ number is a number of up to eight digits, printed in most TV
guides next to the start time of a TV program. You can program a timer
recording quickly by simply entering the code for your program.
Before you begin, complete the VCR Plus+_'channel setup. Detailsare on
page 37.
Press TIMER on the remote control.
Press &_' to select VCR Plus+ programming, then press I_.
Timer
• TimerPioglammin_
TimerList
TOexit
PIess TIMER
3
Press the Number buttons to enter the PlusCode number
from your TV guide, then press OK. If you make a mistake,
press CLEAR to erase the PlusCode number, then enter it again.
Information about the timer will appear. If information is missing or
not available,you may be asked to enter more information. Follow
the instructions given on the screen. You may be asked to enter a
channel number if you have not set up the VCR Plus+ channels as
described on page 37.
Tir_er
VC_Plus+programming
?lusCodenumbel
Mo-FfA_eekll_ Tostore
PTessSELECT PIessOK
If the timer recording information seems correct and com- plete, press OK. Stored will appear at the bottom of the screen
briefly.
®®G®
®
PHILIPS
Timer
VCRPlus+programmi_
Rec
Oat_ Cb Sta_ End r_ode
10/24 _22 09:00AM_SP
Ar_PM Tostole
PressSELECT PressOK
Press TIMER to remove the menu.
Put a recordable DVD+RW or DVD+R in the Recorder.
Press ON/OFF 0 to turn offthe Recorder at least five min-
utes before the timer recording is set to begin. The Recorder
must be off in order for the timer recording to occur.
If you plan to play a DVD+R on another DVD Player, finalize the Disc.
Follow the steps on page 47, choosing "Finalize Disc" at step 4.
To edit your recordings, see page 48. However, editing changes may not be
accessible when you play the Disc on other DVD Players.