Vcr Plus+ Timer Recording - Philips DVDR1000 Owner's Manual

42 VCR Plus+ Timer Recording

A PlusCode is a number of up to eight digits, printed in most TV guides
next to the start time of a TV program. You can program a timer record-
ing quickly by simply entering the code for your program.
Before you begin, complete the VCR Plus+ channel setup. Details are on
page 37.
1
Press TIMER on the remote control.
2 Press 89 to select VCR Plus+ programming, then press :.
Timer
K
uB VCR Plus+ programming
L Timer Programming
Timer List
To exit
Press TIMER
3
Press the Number buttons to enter the PlusCode number
from your TV guide, then press OK. Information about the
timer will appear. If information is missing or not available, you may
be asked to enter more information. Follow the instructions given
on the screen.
If you make a mistake, press CLEAR to erase the PlusCode, then
enter it again.
Timer
VCR Plus+ programming
-- -- -- -- -- -- -- --
Mo-Fr/Weekly To store
Press SELECT Press OK
4
If the timer recording information seems complete, press
OK. "Stored" will appear on the screen briefly.
Timer
VCR Plus+ programming
Date Ch. Start End
10/24 122 09:00AM 09:30AM SP
AM/PM
Press SELECT Press OK
5
Press TIMER to remove the menu.
6
Put a recordable DVD+RW in the Recorder. Press ON/OFF
to turn off the Recorder before the timer recording is set
to begin. The Recorder must be off in order for the timer record-
ing to occur.
B
Rec
Mode
TUNER ON/OFF
REC/OTR
STOP PLAY
REVERSE PAUSE SLOW FORWARD
PREVIOUS NEXT
EDIT
2
CLEAR SELECT
TIMER
VOL
MUTE
1,5
T/C A/CH
ZOOM ANGLE SUBTITLE AUDIO
DIM REPEAT REPEAT SCAN
6
3,4
CH
3