Timer Recording 41 - Philips DVDR985 Owner's Manual

Timer Recording 41
DVD+RW ] DVD+R
Press TIMER on the remote control.
Press &V to select Timer Programming, then press •.
3
4
S
6
7
Date will be selected. Press &V to enter the month and date you want
the recording to start.
Press SELECT repeatedly to choose: the date (timer recording will
occur once on the day you choose); Mo-Fr (timer recording will occur every
weekday at the same time); or a day of the week (for example, Mo for
Monday;timer recording will occur every Monday at the sametime). Press •.
Timer
Timer_roglammi_g
Rec
Date Cfi S_rt _d Mode
122 0900AM 093OAM _
t_o Fr/t/eek_y Tostore
PressSELEC[ Pe_ OK
rimer P/ograrrwing
Bee
Date Cff S#z_ Ead r_ode
_122 o_ogAr_ @:30AM EP
_lo.Ff'We_ly I0 st0_B
PrtssSELEC_ _ressO_
Time_
TimeiPro#lararain9
£ec
D_le Ch Starl End M0_t
] 122 090_AM o_%Ar_ EP
tec_Fr Weekly Tostole
P e_SELECr Press O K
PressSELECTonce PressSELECTagsln PressSELEOTagaln
Recordingwill h _p£an o_6 Recordingwill h_p_nevePjday Recordi5g '_illhappen on[qesame
time o_thedayyouchose Mo_day-Fridaysta_ing onthe dayeve_'#_eLstartin_thedayyouchose
gayyouchose
Ch. (channel) will be selected. Press _,_' to enter the channel you want
to record, then press •. If you are using a Cable Box/Satellite Receiver,
enter channel 3 or 4 (the output channel of your Cable Box/Satellite
Receiver) or the D(T channel (that corresponds to the jacks to which you
connected the Cable Box/Satellite Receiver). Set the channel you want to
record at the Cable Box/Satellite Receiver. Leave it on for the recording.
Start will be selected. Press &¥ to enter the time at which you want
recording to begin - in hours and minutes. Press SELECT repeatedly
to choose AM or PM. When the start time is correct, press •.
Endwill be selected. Press AV to enter the time at which you want
recording to stop - in hours and minutes. Press SELECT repeatedly
to choose AM or PM. When the End time is correct, press •.
Rec Mode (Record Mode) will be selected. Press &V to choose the speed
at which you want recording to occur: HQ, SP, LP, or EP.
HQ allows a maximum of one hour of recording per Disc; SP, two hours; LP,
three hours; and EP, four hours. The slower the speed, the more recording
time per Disc. EP is the slowest speed. The faster the speed, the better the
picture quality. HQ is the fastest speed. Details are on page 46.
Check your timer information. If something is incorrect, press • • to choose
the incorrect information. Use AV to enter the correct data.
When the information is correct, press OK. Stored will appear at the bottom of the screen,then the Timer menu will reappear.
Press TIMER to remove the menu.
Put a recordable DVD+RW or DVD+R in the Recorder. Press
ON/OFF © to turn off the Recorder a few minutes before the
timer recording is set to begin. The Recorder must be off in order for
the timer recording to begin. For the timer recording, the DVD Recorder
will turn itself on, record, then turn itself off when finished.
If you plan to play a DVD+R on another DVD Player, finalize the Disc. Follow
the steps on page 47, choosing "Finalize Disc" at step 4.
To edit your recordings, see page 48. However, editing changes may not be
accessible when you play the Disc on other DVD Players.
Enter the Date, Channel, Start,
and End information with the
Number buttons. Enter channel
numbers as a three-digit number.
For example, for channel 15,
press 0,1,5.
PressON/OFF _ on the remote
to turn off the Recorder and stop
a timer recording that is in
progress.
Use HQ when recording from
di[r_al sources,such as a digital
camcorder.
If you can not select Timer
Programming at step 2, there are
already six Timer recordings set.
Delete another Timer recording
before you try to set a new one.
Details are on page 43.
Finishsetting a Timer recording
and turn off the DVD Recorder
at least five minutes before the
recording will start.
Set the timer recording one
minute ahead of the program
start time. This helps ensure the
entire program is recorded. The
Disc needs about 30 seconds to
prepare for recording.
More Timer recording details are
on page 43.
You cannot change channels dur-
ing recording or watch one chan-
nel while recording another.