Digital Output - Philips DVDR985 Owner's Manual

56 Digital Output
After connecting the DVD Recorder to your TV and other equipment, you
may need to changethe DVD Recorder's Digital Output setting. Look to
seewhich DVD Recorder audio jacks you connected to your other equip-
ment, then set your Digital Output accordingly. The information in step 4
will help you make your choice.
You only need to adjust the Digital Output if you used the DIGITAL
AUDIO OUT (OPTICAL or COAX) jacks of the Recorder. (If you used
the red and white AUDIO OUT jacks, see page 57 to adjust the sound.)
Press SYSTEM MENU. "F_, may be selected. If it is not, press •
to select it.
Press • repeatedly to select i[], then press I_.
Digital output will be selected. Press I_. If Digital output is not selected, press &• to select it, then press I_.
Press &V to select Off, PCM only, or All, then press OK. @Select All if you used the COAX (coaxial) DIGITAL AUDIO OUT
jack to connect the DVD Recorder to a Stereo Receiver that has a
built-in multi-channel decoder. Details are on page 14.
÷ Select Off if you did not use either the COAX (coaxial) or OPTI-
CAL DIGITAL AUDIO OUT jack. For example, if you used the sup-
plied audio cables to connect the red and white AUDIO OUT jacks
of the DVD Recorder to a TV or Stereo, select Off. See page 57 to
adjust your analog sound settings.
÷ Select PCM only if you used the COAX (coaxial) or OPTICAL
DIGITAL AUDIO OUT jack of the DVD Recorder for connections,
but the audio equipment does not include a built-in digital multi-
channel decoder.
I 2 len off no of
$o_nd
Off
Press SYSTEM MENU to remove the menus.
PHILIPS