Philips DVDR985 Owner's Manual page 12

12 Hookups (cont'd)
Connecting to a TV Only
TV has a yellow CVBS Video In jack
Antenna
Ot_ CabEe TV
Signal
Back of TV -- _ i i
(example only)
4
5
6
Connect your Antenna or Cable TV signal to the ANTENNA jack
on the rear of the DVD Recorder.
Connect the yellow VIDEO OUT (CVBS) (EXT 2) jack of the DVD
Recorder to the corresponding VIDEO IN jack on your TV. Use the
supplied video cable, which has a yellow stripe on the cable end.
Connect a supplied two-strand audio cable to the red and white
AUDIO OUT (EXT 1/2) left and right jacks on the DVD Recorder
and to the left/right AUDIO IN jacks on the TV. The supplied two-
strand audio cable has red and white stripes on the cable ends. Match the
cable stripe colors to the jack colors.
Connect the supplied power cord to the MAINS (AC Power) jack
on the rear of the DVD Recorder.
Connect the power cords of the DVD Recorder and the TV to a
power outlet.
Press the STANDBY-ON © button on the front of the DVD
Recorder to turn on the DVD Recorder. The STANDBY-ON light will
turn green.
If "TURN ON TV" appears on the display panel, you need to turn on your
TV and set it to the correct Video In channel. (See next step.) This is part of
the Initial Setup of the DVD Recorder. You cannot see the Initial Setup
screens until you turn on the TV and have it on the right Video In channel.
Turn on the TV power. Set the TV to the correct Audio/Video In
channel. Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXTI or EXT2 or External In, etc. This is not
channel 3 or 4 as it might be when using a VCR. See your TV owner's manual
for details. Or, go to your lowest TV channel and change channels down until
you see the DVD background picture or Initial Setup screen on the TV
screen.
The Initial Setup screen will appear the first time you turn on the Recorder. Go to
page 16 to continue.
• On the TV, the Video In jack is
usually yellow and might be
labeled video, CVBS, composite,
or baseband.
• If you plan to watch your TV
with the DVD Recorder off, con-
ned the supplied RF coaxial
cable to the Recorders TV jack
and to the RF IN or ANTENNA
IN jack (75 ohm) on your tele-
vision. This lets you watch chan-
nels at the TV normally when
the DVD Recorder is off and
will improve the reception at
your TV.