Magic Chef CGS1740ADL Owner's Manual page 9

MGHnNG _FACE BURNERS
CAUTION: To prevent damage to the cooktop or pan,
never operate surface burner without a pan in place,
never allow a pan to boil dry and never operate a
surface burner on HIGH for extended periods of time.
To light surface burner:
1. Place a pan on the burner grate.
NOTE: The burner flame may lift off the burner and a
"roaring" sound may be heard if a pan is not placed on
the grate before lighting the burner.
2. Push in and turn knob to the LITE position.
Pilotless ignition models only: A clicking sound will be
heard and the burner will light. When one burner is
turned on, all four ignitors will spark.
3. After the burner lights, turn the knob to the desired
flame size.
Pilotless ignition models only: The ignitors will
continue to spark until the knob is turned from the LITE
position.
CAUTION: If the flame should go out during a cooking
operation, turn the burner off. If gas has accumulated
and a strong gas odor is detected, wait 5 minutes for
the gas odor to disappear before relighting burner.
ADJUSTING THE F_E
Adjust the flame size so it
does not extend beyond
the edge of the cooking
utensil. This is for
personal safety and to
prevent possible damage
to the appliance, pan, or
cabinets above the
appliance. This also improves cooking efficiency.