Power Sources - Sears LXI series 580.55914490 Owner's Manual

POWER SOURCES
• WHEN USING WITH THE BATTERY (Accessory No.l)
1. To attach the battery align the mark "•" on the
side of the battery with that on the rear right side
of the video camcorder so that the battery fits into
the grooves, and slide the battery downward, as
illustrated. The battery will lock into place.
2. To remove slide the battery upward while sliding
the "BAFFERY" eject lever in the direction of the
arrow.
Mark "•"
Battery
"BATTERY"
Eject Lever
• WHEN USING WITH THE AC ADAPTOR/CHARGER (Accessory No.2)
"DC OUTPUT"
TO"DO IN 9.6V"
@
1. Plug the AC adaptor/charger power cord into AC 2.
electrical outlet.
NOTE: This adaptor/charger is universal for use
with AC 100-240V around the world.
Connect one end of the DC cord (provided) to the
"DC IN 9.6V" jack of the video camcorder.
Connect the other end of the DC cord to the "DC"
OUTPUT" of the AC adaptor/charger.
See the bottom of the AC adaptor/charger.
The rating label is located on the bottom of the AC adaptor/charger.
6