Sears LXI series 580.55914490 Owner's Manual page 28

Example 2: If your TV has "VIDEO-IN" and "AUDIO-IN" jacks:
TV
I I_== I'
t
To "VIDEO IN"
To "AUDIO IN"
Audio/Video Output Cable
1. Connect an audio/video output cable (supplied)
to "AUDIO IN" and "VIDEO IN" of your TV.
2. Connect the other ends of the audio/video output
cable to "AUDIO OUT" and "VIDEO OUT" of the
video camcorder.
3. Turn on TV and TV/VIDEO switch to VIDEO
position.
4. Perform same procedures in steps 6 through 8 of
"Example 1" on page 25.
"Note to CATV system installer: this reminder is provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable entry
as practical."
27