GE JAP02 Owner's Manual And Installation Instructions page 8

" -usmg the surface units. Con some mode s
Throughout this manual, features and appearance may vary from your model.
Win Ma× Hin /
Burner . y
on 8 !'
Hot
indicator Lights (on radiant glass models only)
A Hot indicator light will glow when any radiant element is hot
and will remain on (even after the unit is turned off) until the
surface is cool enough to touch.
A Burner On indicator light will glow when any surface unit
is on.
Using the radiant surface units, con s ome mode sl
Never cook directly on the glass.
Always use cookware.
About the radiant surface units...
surface even when the cooktop
]]!_ iscool.
The radiant cooktop features heating units
beneath a smooth glass surface.
NOTE:A slight odor is normal when a new
cooktop is used for the first time. It is caused
by the heating of new parts and insulating
materials and will disappear in a short time.
The surface unit will cycle on and off to
maintain your selected control setting.
It is safe to place hot cookware on the glass
Even after the surface units are turned off,
the glass cooktop retains enough heat to
continue cooking. To avoid overcooking,
remove pans from the surface units when
the food is cooked. Avoid placing anything
on the surface unit until it has cooled
Alwaysplacethe pan in the center of completely.
the surface unityou are cooking on. Do not slide cookware acrossthe cooktop
becauseit can scratch the glass-the glass is
scratch-resistant,not scratchpraof.
Water stains (mineral deposits)are
removable using the cleaning cream or full-
strength white vinegar.
_, U se of window cleaner may leave an
iridescentfilm on the cooktop. Thecleaning
cream will remove this discoloration.
Don't store heavy items above the cooktop.
If they drop onto the cooktop, they can
cause damage.
_, D o not use the surface as a cutting board.
8
Temperature LimNer
Every radiant surface unit has a temperature
limiter,
The temperature limiter protects the glass
cooktop from getting too hot.
The temperature limiter may cycle the units
off for a time if:
, ; the pan boils dry.
,, the pan bottom is not flat.
the pan is off-center.
there is no pan on the unit.