GE JAP02 Owner's Manual And Installation Instructions page 30

Installation Instructions
PREPARETO INSTALL THE RANGE
TOOLS YOU WILL NEED
Drill with 1/8" Bit
Safety Glasses
Adjustable Wrench
Pliers
Tape Measure
Pencil
1/4" Nut Driver
Level
Phillips Screwdriver
Flat-blade Screwdriver
PARTS INCLUDED
Anti-Tip Bracket Kit
rlq
REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure to
remove packaging materials could result in
damage to the appliance.
PREPARE THE OPENING
. Allow 2" spacing from the range to adjacent vertical
walls above the cooktop surface. Allow 30" minimum
clearance between the surface units and the bottom
of unprotected wood or metal top cabinet, and 15"
minimum between the countertop and adjacent
cabinet bottom.
. To eliminate the risk of burns or fire when reaching
over hot surface elements, cabinet storage space
above the cooktop should be avoided. If cabinet
storage space is to be provided above the cooktop,
the risk can be reduced by installing a range hood
that protrudes at least 5" beyond the front of the
cabinets. Cabinets installed above a cooktop may be
no deeper than 13".
I
I
From
combustib e
walls above
cooking
Surface
Wall Mounted .........
Recommended acceptabJe electrical outlet
area Olient t_e e ectricol lecepLade so the
lengt _is par@e to the foot
Models A B C D
JAS02 44-3/4" 27-3/4" 2"(5,08 cm) 41"(104,14cm)
JAP02 47" 27-3/4" 2"(5,08 cm) 41"
Flooring under the range
Your range, like many other household items, is
heavy and can settle into soft floor coverings such
as cushioned vinyl or carpeting.
When moving the range on this type of flooring,
it should be installed on a 1/4" thick sheet of
plywood (or similar material) as follows:
When the floor covering ends at the front of the
range, the area that the range will rest on should
be built up with plywood to the same level or
higher than the floor covering. This will allow the
range to be moved for cleaning or servicing.
3O