GE JAP02 Owner's Manual And Installation Instructions page 27

Cleaning the glass cooktop, con s ome m odels) GEAppliances.c
Clean your cooktop after
each spill. Use CERAMA
BRYTE ®Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
ONLYuse CERAMABRYTE ® Ceramic Cooktop
Cleaner on the glass cooktop. Other creams
may not be as effective.
To maintain and protect the surface of your
glass cooktop, follow these steps:
ri1
Before using the cooktop for the first time,
clean it with CERAMABRYTE ® Ceramic
Cooktop Cleaner. This helps protect the
top and makes cleanup easier.
[] Daily use of CERAMABRYTE ® Ceramic
Cooktop Cleaner will help keep the
cooktop looking new.
@
%
@
Shakethe cleaning cream well. Apply a
few drops of CERAMABRYTE ® Ceramic
Cooktop Cleanerdirectly to the cooktop.
Use a paper towel or CERAHABRYTE ®
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
Use a dry cloth or paper towel to
remove all cleaning residue. No need to
rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughly.
Use a CERAFIABRYTE ® Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING:
DAMAGE to your glass
surface may occur if you use scrub pads
other than those recommended.
Allow the cooktop to cool.
Spread a few drops of CERAHABRYTE ®
Ceramic Cooktop Cleaner on the entire
burned residue area.
@
Using the included CERAMABRYTE ®
Cleaning Pad for Ceramic Cooktops, rub
the residue area, applying pressure as
needed.
r#]
@
If any residue remains, repeat
the steps listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMABRYTE ®
Ceramic Cooktop Cleaner and a paper
towel.
The Ceramic Cooktop Scraper and
all recommended supplies are
available through our dealers or
through a Camco Parts Store.
NOTE: Do not use a dull or nicked
blade.
Heavy, Burned-On Residue
rl] Allow the cooktop to cool. J-_
Use a single-edge razor blade scraper
at approximately at a5 angle against
the glass surface and scrape the soil. It
will be necessary to apply pressure to
the razor scraper in order to remove r_
the residue.
After scraping with the razor scraper,
spread a few drops of Ceramic Cooktop
Cleaner on the entire burned residue
area. Use the Cleaning Pad to remove
any remaining residue.
Foradditional protection, after all residue
has been removed, polish the entire
surface with CERAMABRYTE ® Ceramic
Cooktop Cleaner and a paper towel.
27