Installation Instructions; Location Requirements - Fisher & Paykel Intuitive DEIX1 User Manual

Fisher & paykel dryer installation instruction and user guide
Table of Contents

Advertisement

Installation Instructions

Read the Important Safety Instructions on pages 5 – 7 before you start installing the dryer.

Location Requirements

The dryer must not be stored or installed in an area that is exposed to water or the weather.
It must be installed in a well-ventilated location. Do not install it in any room or cupboard which
does not permit the free flow of replacement air.
It must exhaust air outside.
Before installing the dryer ensure that there is sufficient height to fully open the lid.
Allow sufficient room behind the dryer for the exhaust.
The air intake is at the rear of the dryer. Ensure that there is a sufficient air passage on each side
of the dryer for intake air.
Exhaust Outlet Location
352mm
Note:
These are dimensions looking at the back of the dryer. When looking at the wall to cut the duct
hole, dimensions will be the mirror image of these.
8
700mm
685mm
Exhaust outlet
333mm
Does not include
foot height

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF