GE Profile 42 Owner's Manual And Installation Instructions page 37

Installation Instructions
[] INSTALL DOOR PANELS
WITH PRE-INSTALLED HANDLES
?
J
Handle
Fresh Food
Refrigerator
Door
3,
!
3/4"gust0m Panel
if Required
Install 114" Decorative Panels:
• Remove Handles
Open door to 90 °. Remove 5 Phillips head
screws from the Fresh Food and Freezer door
handles; retain all screws. Lift off door handles.
• Install Door Panels
NOTE: Carefullu push the Fresh Food panel in until
it slides into the slot behind the trim. Gently push
to opposite side. Repeat procedure for upper and
lower Freezer panels.
• Reinstall Handles
Reinstall Fresh Food door handle with
the original 5 Phillips head screws. Tighten.
Repeat for Freezer door handle.
NOTE: Ensure that the edge of the handle does
not pinch the door gasket.
• 3/4" Custom Decorative Panels
If Uou choose to install custom wood panels,
theu must be cut to dimensions shown on
pages 23-30. The panels will slide into the
frame on the doors and grille.
IMPORTANT NOTE: Maximum custom panel
thickness must not exceed 1-1/8" thick and 70 Ibs
for the Fresh Food door, 45 Ibs total for the Freezer
door and 15 Ibs for the Grille panel.
S
37