GE JTP95 Owner's Manual page 32

Using the self-cleaning lower oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
Hew to Delay the Start of Cleaning
[Z] Press the SELF CLEAN pad.
[-2-7 Using the number pads, enter the
desired clean time.
%
@
Press the DELAYSTARTpad. The
earliest start time you can set xdll
appear in tile display.
Using the number pads, enter the
time of day you want tile clean Q,cle
to start.
[] Press the START pad.
Tile door locks m.ltomatically. Tile display
will show the start time. It will not be
possible m open tile oven door until
tile temperature &ops below file lock
mmperamre and tile LOCKEDDOOR
light goes ore
When tile LOCKEDDOOR light is off;
()pen tile door.
After a Clean Cycle
You may notice some white ash in tile
oven. Wipe it up widl a dmnp clodl after
tile oven cools.
If white spots remain,remove them with a soap-
filled steel wooIpad and rinse thoroughly with a
vinegarand water mixture,
These deposits are usually a salt
residue that cannot be removed by
tile clean cycle.
If din oven is not clean _ff_er one clean
o,cle, repeat tile o,cle.
;; You cannot set file oven fbr cooking
until the oven is cool enough for the
door to unlock.
While tile oven is self:cleaning, you
can press file CLOCKpad to display
tile time of day. To return to tile
clean (:ountdo_m, press tile COOKING
TIME pad.
If dm shelves become hard to
slide, xdpe tile shelf supports with
cooking oil.
32