GE Profile PV977 Owner's Manual And Installation Instructions page 23

Installation Instructions
[STEP 7 DETERMINE DUCT LENGTH
AND INSTALL DUCT
• Measure from the hood exhaust opening to
the top of the supports as shown in the figure.
• Subtract the height of the air deflector.
• Cut the 8" duct to the appropriate length. Attach
to air deflector using aluminized tape and screws.
h of duct
d minus the
protrudi.n.g
ISTEP 81 INSTALL HOOD ASSEMBLY
TO CEILING SUPPORT
-&WARNING: Two
people are required
to lift and position the hood onto the support.
• Carefully l ift the hood assembly to the ceiling
support. The clips on theceiling s upportwill snap
intotheopenings on the vertical supports.
Slip the duct over theexhaust opening.
Using the screws provided, a ttachthe upper
verticol s upportsto theceiling s upport,2 screws
per sidefora totol of 16 screws.
%01 the airduct to theexhaust opening using
aluminized duct tope.
Clips _ Ceiling
support
Air
deflector
Tape with
aluminized
duct tape
23