GE Profile PV977 Owner's Manual And Installation Instructions page 10

Installation Preparation
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
_.................................... ::::::::::::::::::::: )
Pencil and tape measure
Spirit level
Safety glasses
Phillips screwdriver
Flashlight
Metal snips
Electric drill with 3/16" bits,
#2 Phillips head
Pliers
Ste ladder
_]_
Wire cutter/stripper
Saber saw or Key Hole saw
UL listed wire nuts
Aluminized
Duct tape
©
Strain relief for
junction box
8" Roundmetal
duct, length to
suit installation
120V 60Hz. 15 or 20 Amp,
2-wire with ground, properly
grounded branch circuit
REMOVE THE PACKAGING
il CAUTION: Wear g,oves to
protect
against sharp edges.
• Remove the duct covers.
• Remove the hardware bag, literature package
and other boxed parts.
• Remove and properlg discard the protective
plastic wrapping and other packaging materials.
10