Making A Conference In Ad-Hoc Mode - Panasonic HDVC-MPCS Operating Instructions Manual

Note
•
For details about the types of screen layout, refer to "Screen Layout Pattern (Page 10)".
•
This operation cannot be performed if "Auto" is set to "Screen Layout Switching" in the profile
selected in step 3.
6.
Select the sites to not participate in the conference.
1.
Select the sites to not participate in the conference from the "Participant" list.
2.
Click "<<Remove".
•
Selected sites are moved to the "Non Participant" list.
Note
•
This operation is not necessary if all the sites registered in the profile will participate in the
conference.
•
Once the conference starts, the sites in the "Non Participant" list cannot participate in the
conference.
•
To start a conference, it is necessary to have 2 or more sites included in the "Participant" list.
Therefore, it is not possible to move sites to the "Non Participant" list when only 2 sites are
included in the "Participant" list.
•
In the "Participant" list, you cannot include more sites than the number of registered license ports.
7.
Select sites to not dial out to.
1.
Uncheck the "Dial Out" check box for sites to not dial out to, from the "Participant" list.
Note
•
This operation is not necessary if you will dial out to all sites in the "Participant" list.
8.
Click "Start Conference".
•
The sites in the "Participant" list with the "Dial Out" check box checked are dialled. The conference
starts when the sites answer.

Making a Conference In Ad-Hoc Mode

1.
Click the "Home" screen selecting tab.
•
The Home screen is displayed.
2.
Click the "Conference Start/End" tab in the operation area.
•
The conference mode select screen is displayed.
Basic Operation
Operating Instructions 15