Table of Contents
Advertisement
Note
•
Sites using software version 2.40 or earlier for the HD Visual Communication Unit may display
the computer's screen in an incorrect aspect ratio (horizontally long). In this case, perform the
following procedure to change the aspect ratio.
1.
Press [G].
•
A dialogue box to change the aspect ratio is displayed.
2.
Select "4:3" using [
•
The image is displayed in the selected aspect ratio and the dialogue box will disappear
after approximately 3 seconds.
Sub video camera's image:
1.
Press [Camera Sub].
•
The sub video camera's image is displayed. The same image is displayed on other sites' displays.
2.
Press [ ][1][0].
•
The site's image is displayed in full screen.
3.
Press [ ][1][1].
•
The screen layout returns to the layout pattern in use before step 2 was performed.
4.
Press [Camera Main] to restore the original image.
][
].
Basic Operation
Operating Instructions
25
Advertisement
Table of Contents
