Muting/Unmuting The Audio (Normal Mode Only) - Panasonic HDVC-MPCS Operating Instructions Manual

Basic Operation
2.
Click the "Conference Operation" tab in the operation area.
•
The conference operation screen is displayed.
3.
Select the sites for which you want to change the display position, from the "Active Participant List".
4.
Select the display position from the "Display Position Switching" drop-down list.
"Top": The first priority position
"Bottom": The last priority position
"Hide": Not displayed
5.
Click "Execute".
•
A dialogue box to confirm the change of the display position is displayed.
6.
Click "OK".
•
The display position of the site is changed.

Muting/Unmuting the Audio (Normal Mode only)

Note
•
To perform this operation, "Manual Control" in the profile must be set to "Enable". For details, refer
to "Profile Settings".
1.
Click the "Home" screen selecting tab.
•
The Home screen is displayed.
2.
Click the "Conference Operation" tab in the operation area.
•
The conference operation screen is displayed.
18 Operating Instructions