Table of Contents
Advertisement
Preparation
Profiles
You can register settings such as the sites that can participate in a conference, bandwidth, and screen layout,
to a profile before starting a conference. In Normal Mode, it is necessary to specify a profile to start a
conference. Once a profile is registered, you can start a conference with the same settings by simply specifying
the profile. For details about how to make profile settings, refer to "Profile Settings".
Conference Mode
When making a conference, there are 2 conference modes, as follows. For details, refer to "Making a
Conference In Normal Mode " or "Making a Conference In Ad-Hoc Mode".
Conference Mode
Normal Mode
Ad-Hoc Mode
Dial-in/Dial-out
There are 2 types of connection methods to make a conference using HDVC-MPCS, as follows:
Connection Methods
Dial-out
Dial-in
Switching the Display
Screen Layout Pattern
You can select the screen layout during a conference from the following 7 patterns. The number in the layout
configuration shows the display priority of the sites' images.
Layout number
CP1
10
Operating Instructions
A conference is performed by specifying a profile that has settings such as
the sites and bandwidth registered.
In Normal Mode, you cannot be connected to sites that are not registered in
the profile. Therefore, this mode is recommended for highly-confidential
conferences.
A conference is performed without specifying a profile. It is necessary to set
the sites to participate in a conference when starting the conference.
In Ad-Hoc Mode, any sites can participate in a conference because a profile
is not specified.
Call sites to participate in the conference from the HDVC-MPCS.
Have participants in the conference call the HDVC-MPCS.
Layout configuration
1
Description
Description
Advertisement
Table of Contents
