Advanced Settings - Panasonic TH-42PF20W Operating Instructions Manual

Picture Adjustments
Item Effect
Contrast
Less
Brightness
Darker
Colour
Less
Hue
Reddish
Sharpness
Less

Advanced settings

Item Effect
Black
extension
Less
Input level
Less
Gamma
Down
AGC
Off
W/B High
R
Less
W/B High
G
Less
W/B High
B
Less
W/B Low R
Less
W/B Low G
Less
W/B Low B
Less
Notes:
• Carry out "W/B" adjustment as follows.
1. Adjust the white balance of the bright sections using the "W/B High R", "W/B High G" and "W/B High B" settings.
2. Adjust the white balance of the dark sections using the "W/B Low R", "W/B Low G" and "W/B Low B" settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint (
On the remote control unit, while the "Advanced settings" menu is displayed, if either the N button is pressed at any time or
the ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
28
Adjustments
Selects the proper brightness
and density for the room.
More
Adjusts for easier viewing of
dark pictures such as night
Brighter
scenes and black hair.
Adjusts colour saturation.
More
Adjusts for nice skin colour.
Greenish
Adjusts picture sharpness.
More
Adjusts the dark shades of the image in gradation.
More
Adjustment of parts which are extremely bright and hard to see.
More
S Curve
Up
Increases the brightness of dark signal automatically.
On
Adjusts the white balance for light red areas.
More
Adjusts the white balance for light green areas.
More
Adjusts the white balance for light blue areas.
More
Adjusts the white balance for dark red areas.
More
Adjusts the white balance for dark green areas.
More
Adjusts the white balance for dark blue areas.
More
/ Normalise Normalisation)
Notes:
• "Colour" and "Hue" settings cannot be adjusted
for "RGB/PC" input signal.
• You can change the level of each function
(Contrast, Brightness, Colour, Hue, Sharpness)
for each Picture Mode.
• The setting details for Normal, Dynamic,
Cinema and Monitor respectively are memorized
separately for each input terminal.
• The "Hue" setting can be adjusted for NTSC
signal only during Video (S Video) input signal.
• In Contrast, there is not a noticeable change
even when contrast is increased with a bright
picture or reduced with a dark picture.
Details
2.0 2.2 2.6