Table of Contents
Advertisement
Item
Effect
Contrast
Less
Brightness
Darker
Colour
Less
Tint
Reddish
Sharpness
Less
Advanced settings
Item
Effect
Black
extension
Less
Input level
Less
W/B High
R
Less
W/B High
B
Less
W/B Low R
Less
W/B Low B
Less
Gamma
Down
AGC
Off
Notes:
• Carry out "W/B" adjustment as follows.
1. Adjust the white balance of the bright sections using the "W/B High R" and "W/B High B" settings.
2. Adjust the white balance of the dark sections using the "W/B Low R" and "W/B Low B" settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint (
On the remote control unit, while the "Advanced settings" menu is displayed, if either the N button is pressed at any time or
the ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
Adjustments
Selects the proper brightness and
density for the room.
More
Adjusts for easier viewing of dark
pictures such as night scenes and
Brighter
black hair.
Adjusts colour saturation.
More
Adjusts for nice skin colour.
Greenish
Adjusts picture sharpness.
More
Adjusts the dark shades of the image in gradation.
More
Adjustment of parts which are extremely bright and hard to see.
(This cannot be adjusted when the input signal is Digital.)
More
Adjusts the white balance for light red areas.
More
Adjusts the white balance for light blue areas.
More
Adjusts the white balance for dark red areas.
More
Adjusts the white balance for dark blue areas.
More
S Curve
Up
Increases the brightness of dark signal automatically.
On
/
Normalisation)
Normalise
Details
2.0
2.2
2.5
Picture Adjustments
Notes:
• "Colour" and "Tint" settings cannot be
adjusted for "RGB/PC" and "Digital"
input signal.
• You can change the level of each
function (Contrast, Brightness, Colour,
Tint, Sharpness) for each Picture
Mode.
• The setting details for normal,
dynamic and cinema respectively
are memorized separately for each
input terminal.
• The "Tint" setting can be adjusted
for NTSC signal only during "AV
(S Video)" input signal.
• In Contrast, there is not a noticeable
change even when contrast is
increased with a bright picture or
reduced with a dark picture.
23
Advertisement
Table of Contents
