Remote Control Transmitter - Panasonic TH-42PF20W Operating Instructions Manual

Remote Control Transmitter

ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 18)
Standby (ON / OFF) button
The Plasma Display must first be
plugged into the wall outlet and turned
on at the power switch (see page 13).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off
to Standby mode.
POS. /SIZE button
(see page 24)
PICTURE button
(see page 27)
Sound mute On / Off
Press this button to mute the
sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
N button
(see page 26, 27, 28, 32)
POSITION buttons
INPUT button
Press to select Input signal
sequentially. (see page 15)
MULTI Window buttons
(see page 19)
Basic Controls
OFF TIMER button
The Plasma Display can be preset to switch to
stand-by after a ¿ xed period. The setting changes
to 30 minutes, 60 minutes, 90 minutes and 0
minutes (off timer cancelled) each time the button
is pressed.
30 60
When three minutes remain, "Off timer 3" will
À ash.
The off timer is cancelled if a power interruption
occurs.
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 24)
SET UP button (see page 22)
SOUND button (see page 32)
Volume Adjustment
Press the Volume Up "+" or Down "–"
button to increase or decrease the
sound volume level.
R button (see page 22)
Press the R button to return to
previous menu screen.
RECALL button
Press the "RECALL" button to display
the current system status.
Input label
1
Aspect mode (see page 18)
2
Audio input (see page 58)
NANODRIFT Saver operating
(see page 37)
Off timer
3
The off timer indicator is
displayed only when the off
timer has been set.
Clock display (see page 55)
4
4 1 0 : 0 0
Digital Zoom (see page 21)
90
0
PC 1
4:3
2
COMPONENT
NANODRIFT
Off timer 90
3
17