Adjusting Pos. /Size - Panasonic TH-42PF20W Operating Instructions Manual

Adjusting Pos. /Size

1
2
3
4
Notes:
• Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are
memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF,
1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)
• If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture
position movement cannot be controlled by the Picture Pos./Size function.
Auto Setup H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the RGB or
PC signal is received.
This setting is enabled under the following conditions:
• This setting only support single screen display. Two screen display or multiple display are not
supported.
• When "Component/RGB-in Select" or "YUV/RGB-in select" in the "Setup" menu (see page 47) is set to "RGB",
this setting is enabled.
• When the signal is not PC format, this setting is enabled only if "Over scan" (see page 25) is "Off" or
"1:1 Pixel Mode" (see page 26) is "On", and H-Size/V-Size is not automatically adjusted.
This setting will be invalid and will not work under the following conditions:
• Aspect is set to "Just"
• "Display size" in the Options menu (see page 54) is set to "On"
Using Remote Control
Auto mode
When the "Auto Setup" is set to "Auto" in the Options menu (see page 55), automatic position adjustment starts:
• When the display power is turned ON.
• When the input signal is switched.
24
Press to display the Pos. /Size menu.
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
When on the remote control is pressed, "Auto Setup" will be executed.
When Auto Setup does not work, "Invalid" is displayed.
Pos. /Size
Normalise
Normal
Auto Setup
0
H-Pos
0
H-Size
0
V-Pos
0
V-Size
0
Dot Clock
0
Clock Phase
0
Clamp Position
1:1 Pixel Mode
Note:
Unadjustable items are grayed
out.
Adjustable items differ depending
on the input signal and the
display mode.
Off