Sync; Sdi Through; Input Signal Display - Panasonic TH-42PF20W Operating Instructions Manual

Sync

This function operates only during input from PC IN terminal.
Select Signal from the "Setup" menu during RGB or Component input signal.
Setting RGB sync signal
Con¿ rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
Setting Component sync signal
Con¿ rm that the input is set to Component input (this setting is valid only for Component input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with "Sync on G".

SDI Through

Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board
(TY-FB11DHD) is selected.

Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
Press to select the "Sync".
Press to adjust.
Press to select the "SDI Through".
Press to select "On" or "Off".
On: Enables active through.
Off: Disables active through.
Setup for Input Signals
Signal
Sync
Cinema reality
XGA Mode
Signal
Cinema reality
SDI Through
Noise reduction
H-Freq. 63.98
V-Freq. 60.02
Signal Format 1280×1024/60
H-Freq. 63.98
V-Freq. 60.02
Dot Clock Freq. 108.0
Signal Format 1280×1024/60
[ RGB ]
Auto
Off
Auto
[ Digital ]
Off
Off
Off
kHz
Hz
kHz
Hz
MHz
51