Table of Contents
Advertisement
Item
Select "Off" or "On".
AI-Synchronization
Notes:
• If you set AI-synchronization to On, the following menus will be unavailable and these
• This function cannot be adjusted during input from VIDEO terminal.
4
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
Note:
To operate this function, please purchase ID remote controller sold separately.
Object model : EUR7636070R
1
Switch
to
2
Press the
button on the remote control.
3
Press one of
-
4
Press one of
-
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the ¿ rst two numbers become the ID number for the remote
control.
ID remote control button operation
The operation is the same as normal remote control except for the
ID Cancellation
Press
button on remote control. (This has the same effect as pressing the
Notes:
• Set the Remote ID "On" to operate the ID remote control.
If Remote ID is set to "On", you can use the remote control without identical ID number during option menu display.
(see page 54)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is
not the same as the ID select number (see page 54).
The brightness depends on each
settings will be ¿ xed to the initial values.
Picture menu: Colour, Hue, Input level (Advanced settings)
Press to exit from Setup.
on the right side.
,
for the tens digit setting.
,
for the units digit setting.
Setup for MULTI DISPLAY
Details
display's setting.
Off
button.
Equalize the brightness of all the
displays.
On
,
,
buttons at the same time.)
43
Hide quick links:
Advertisement
Table of Contents
