DigiDesign Pro Tools 8.0 Reference Manual page 627

Region-Based Real-Time Properties
Region-based Real-Time Properties can only be
applied using the Real-Time Properties window
(Event > MIDI Real-Time Properties). Real-Time
Properties can be applied to multiple regions.
Once Real-Time Properties have been assigned
to a region, the region can be moved or copied
and pasted and retain its Real-Time Properties.
Track-Based Real-Time Properties
All track-based Real-Time Properties consis-
tently apply to MIDI data throughout the entire
track. However, regions with region-based Real-
Time Properties will take precedence over any
track-based Real-Time Properties. You can clear
region-based Real-Time Properties by selecting
the region and clicking the Clear Region Proper-
ties button in the Real-Time Properties window
(see "Writing Real-Time Properties to Tracks or
Regions" on page 609).
For greater flexibility, when Real-Time Proper-
ties are assigned on a track basis they are actu-
ally contained in a track playlist. This lets you
create multiple playlists containing different
Real-Time Property settings.
Writing Real-Time Properties to
Tracks or Regions
Once you have found the settings you want, you
can write Real-Time Properties to the selected
tracks or regions using the Real-Time Properties
window. Real-Time Properties are applied to the
current MIDI data on the track or in a region.
To write Real-Time Properties to tracks:
Enable Link Track and Edit Selection.
1
Select one or more tracks to which you want
2
to apply Real-Time Properties.
Open the Real-Time Properties window (Event
3
> MIDI Real-Time Properties).
Select Tracks from the Real-Time Properties Ap-
4
ply To pop-up menu.
Configure the Real-Time Property settings.
5
Do one of the following:
6
• Click the Write to Track button in the Real-
Time Properties window.
– or –
• Choose Track > Write MIDI Real-Time Proper-
ties.
To write Real-Time Properties to regions:
Select one or more regions to which you want
1
to apply Real-Time Properties.
Open the Real-Time Properties window (Event
2
> MIDI Real-Time Properties).
If Link Track and Edit Selection is enabled, se-
3
lect Regions from the Real-Time Properties Apply
To pop-up menu.
Configure the Real-Time Property settings.
4
Click the Write to Region button.
5
To clear Real-Time Properties from a region:
Select the region for which you want to clear
1
Real-Time Properties.
Open the Real-Time Properties window (Event
2
> MIDI Real-Time Properties).
Select Regions from the Real-Time Properties Ap-
3
ply To pop-up menu.
Click the Clear Region Properties button.
4
Chapter 29: MIDI Editing 609