DigiDesign Pro Tools 8.0 Reference Manual page 588

Using Collection Mode
Collection mode is available in Bar|Beat Marker
Generation, Groove Template Extraction, or Re-
gion Separation mode (audio only), and is ac-
cessed by selecting Collection in the Detection
pop-up menu.
Beat Detective, Collection mode options
To use Collection mode:
In the Edit window, make an audio selection
1
on a single track. Make sure the selection's start
and end points fall cleanly on the beat.
In the Beat Detective window, select one of
2
the following modes:
• Bar|Beat Marker Generation
• Groove Template Extraction
• Region Separation (audio only)
Define or capture the selection as described in
3
"Defining a Beat Detective Selection" on
page 552.
Configure the Detection options so the selec-
4
tion's peak transients are accurately detected
(see "Generating Beat Triggers" on page 554).
From the Detection pop-up menu, select Collec-
5
tion.
In the Detection (Collection Mode) section,
6
click Add All to add all the current beat triggers to
the collection.
570 Pro Tools Reference Guide
From the Detection pop-up menu, select Nor-
7
mal and move the selection to the next track you
want to analyze. Make sure to keep the selection
range constant for each track.
Press Start+P (Windows) or Control+P
(Mac) to move the selection up, or
Start+Semi-colon (Windows) or Con-
trol+Semi-colon (Mac) to move the selection
down.
With Commands Keyboard Focus enabled,
press "P" to move the selection up, or Semi-
colon (;) to move the selection down. Hold
down the Shift key to retain and add to the
current selection
Configure the Detection options so the selec-
8
tion's peak transients are accurately detected
(see "Generating Beat Triggers" on page 554).
Select Collection again.
9
Do one of the following:
10
• In the Detection (Collection Mode) sec-
tion, click Add Unique to add only the
unique triggers from the track to the collec-
tion. When you choose to add unique trig-
gers, Pro Tools looks for triggers that are
close to triggers already collected from
other tracks. Where triggers already exist,
the newly detected triggers are discarded.
• Click Add All to add all triggers to the collec-
tion.
• Click Clear All to clear all triggers from the
collection.