Separating Regions That Include Fades Or Crossfades - DigiDesign Pro Tools 8.0 Reference Manual

Nudge the region by pressing Plus (+) or
2
Minus (–) on the numeric keypad.
Stretching the crossfade by nudging
Separating Regions That
Include Fades or Crossfades
You can create regions from track material that
overlaps with fades or crossfades. If the Preserve
Fades when Editing option is enabled in the Edit-
ing Preferences page, the fades from the source
region are adjusted to the new region.
To separate a region that overlaps with a fade or
crossfade:
With the Selector tool, drag to select the ma-
1
terial for the new region.
Choose Edit > Separate Region > At Selection.
2
Where your selection overlaps any fade-ins or
fade-outs, the fade is trimmed to fit the selec-
tion.
Selecting material that overlaps a fade-in
Result of Separate Region command on fade-in
Where your selection overlaps a crossfade, the
crossfade is separated into a fade-out and fade-in
at the selection boundary.
Selecting material that overlaps a crossfade
Result of Separate Region command on crossfade
If the Preserve Fades when Editing option is
not enabled in the Editing preferences, any
fades within the selection are deleted when
editing.
Chapter 26: Fades and Crossfades 527